فيديو
المواصفات الفنية
Equipment
Book Block Feeder (Automatic) – Kolbus XSL260
- Year of manufacture: 2002
- Automatic book block feeder for the perfect binding line
Gathering Machine – Kolbus ZU 840
- Year of manufacture: 2002
- Hand feeding station
- 22 gathering stations
- 16 streamfeeders, type STA840, year of manufacture 2008
- 2 crane systems, Grama CL 31, year of manufacture 2008 (for the streamfeeders)
- ATC (Automatic Thickness Control)
Binder – Kolbus KM 491.P
- Year of manufacture: 2002
- Infeed incl. coupling to the gathering machine (ZU 840)
- 32 clamps
- Stream cover feeder
- Co-Pilot
- 2 milling stations (spine preparation)
- Spine gluing: 2 stations (1x Hotmelt, 1x PUR)
- Side gluing: Hotmelt
- Nipping and pressing station
- Gauze application unit
- HIMMEL High Frequency Dryer
Premelter / Glue Units
- Robatech Premelter ICS 80, year of manufacture 1996
- Kolbus LH 370 Premelter, year of manufacture 2002
- Robatech RobaPur Premelt 20 MOD ICS-A, year of manufacture 2013
Drying Conveyors
- 2x Kolbus XAF 660 drying towers, year of manufacture 2002
Intermediate Delivery – Kolbus TS.Z
- Year of manufacture: 2012
Stacker – Kolbus XRS 130
- Year of manufacture: 2002
- Positioned directly after the intermediate delivery (TS.Z)
Three-Knife Trimmer – Kolbus HD 142.P (Optional also with 2004 Kolbus HD 152.P)
- Year of manufacture: 2008
Infeed after the intermediate delivery (TS.Z)
- Infeed with timing lock and intermittent roller
- Right infeed with alignment edge in running direction right, for product orientation
- Automatic alignment in the cutting station
- Integrated counting and stacking
- Prepared for speed synchronization with downstream machines
Cutting Unit
- Trim type: three-sided trimming (head, foot, front edge)
- Chip removal via air nozzles integrated in the knife holders; prepared for connection to a central chip extraction system
- Automatic central lubrication system
- Small format device
Control System
- Co-Pilot console with touchscreen display
- Production selection and format memory
- Operator-guided format changeover
- Automatic format setting
- Automatic clamping for side knife adjustment and press beam
- Fine adjustment via +/- buttons during production
- Product counter (job, shift, start/stop counters)
- Machine fault and material flow monitoring
Accessories
- Machine walkway, consisting of 2 aluminum ladders, ZARGES (4-step), and 1 aluminum handrail
Technical Details
Gathering Machine (ZU 840)
| Parameter | Value |
|---|---|
| Max. format | 420 x 320 mm |
| Min. format | 105 x 105 mm |
Binder (KM 491.P)
| Parameter | Value |
|---|---|
| Speed | max. 10,000 cycles/h |
| Format | max. 305 x 510 x 20 mm / 12 1/64 x 20 5/64 x 25/32" (block format); max. 290 x 510 x 65 mm / 11 27/64 x 20 5/64 x 2 9/16" (gluing only); min. 100 x 125 x 3 mm / 3 15/64 x 4 59/64 x 1/8" |
| Overall length (incl. standard infeed and stream cover feeder) | 14,720 mm / 48' 3 35/64" |
| Number of clamps | 32 |
| Electrical equipment | 230/400 V, 3-phase, 50 Hz |
Three-Knife Trimmer (HD 142.P)
| Parameter | Value |
|---|---|
| Infeed rate | 7,500 individual products/hour |
| Maximum speed | 3,900 cuts/hour |
| Maximum format | 305 × 420 × 80 mm / 12.0 × 16.5 × 3.1 in |
| Maximum format (untrimmed) | 310 × 430 × 80 mm / 12.2 × 16.9 × 3.1 in |
| Minimum format | 100 × 100 × 2 mm / 3.9 × 3.9 × 0.08 in |
| Minimum format (small format device, trimmed) | 70 × 100 mm / 2.8 × 3.9 in |
| Minimum format (small format device, untrimmed) | 75 × 104 mm / 3.0 × 4.1 in |
| Maximum stack height | 80 mm / 3.1 in |
| Maximum pressing force | 20 kN |
| Maximum waste strip width | 40 mm / 1.6 in |
| Compressed air requirement | 40 Nm³/h at 6 bar / 1,413 CFM at 87 psi |
| Chip extraction | 3,000 m³/h at ~1,000 Pa / Ø 200 mm |
| Machine length × width × height | 3,250 × 3,060 × 1,970 mm / 10.7 × 10.0 × 6.5 ft |
| Machine weight | 5,170 kg / 11,397 lbs |
| Electrical supply | 3-phase, 400 V / N / PE, 50 Hz |
ماكينات مشابهة
Kolbus KM 412.B
خط تجليد الأغلفة اللينة عالي الأداء، مجهز بـ 21 محطة تجميع، مغذيات تيار، 2 لاصق بطاقات، 2 محطة لصق عمود الكتاب و1 محطة لصق جانبي، لاصق حراري و PUR، تغطية بالشاش، منشار تشطيب، مقطع ثلاثي السكاكين، رصاف...
Kolbus KM 200
محطة التغذية اليدوية، محطة الورقة الطرفية، محطة غراء PUR للعمود الفقري ومحطة الغراء الساخن للجانبين مع أجهزة الإذابة المسبقة، محطة الشاش، مغذي الأغلفة، برج التجفيف Ambaflex، Kolbus HD 143.D
Müller Martini Corona C12
15 محطة تجميع، Streamfeeders، 26 مشبك بتنسيق كبير، غراء ساخن، وحدة تغذية الأغلفة، وآلة قطع ثلاثية السكاكين مدمجة.
Kolbus Publica KM 411.B with Endsheet
آلة تحضير كتل الكتب عالية الأداء مع 24 محطة تجميع، وحدة تغذية الأوراق الطرفية، تغطية بالشاش، غراء هوت ميلت وبولي يوريثان، منشار تقسيم، وآلة قطع ثلاثية السكاكين متكاملة.
Müller Martini Corona C15 S/35
12 محطة تجميع مع ASIR 3، 10 مغذيات تدفق ونظام رافعة، مكبس تجليد بـ 35 مشبك مع لصق بالذوبان الساخن ثنائي الطلقة، قاطعة ثلاثية السكاكين Zenith S، ومكدس CB 16.
هل تحتاج إلى مزيد من المعلومات؟
خبراؤنا مستعدون للإجابة على أسئلتك ومساعدتك في اتخاذ القرار الصحيح.